Christian Diskus,
"Unmatched Accuracy"
, in IEEE Microwave Magazine, Vol. 16, Nummer 5, IEEE, Seite(n) 28-33, 6-2015, ISSN: 1527-3342
Original Titel:
Unmatched Accuracy
Sprache des Titels:
Englisch
Original Kurzfassung:
This article seeks to shed light on the the mystery surrounding the effective source match of three-resistor power dividers and of two-resistor power splitters.
The distinction between dividers and splitters is often found in the literature, but is ambiguous. In common use and described in many microwave textbooks, the three-resistor divider is the component of choice for standard applications. The three-resistor devider is matched at all three ports and can be used both for splitting incoming power into two parts and for combining two signals into one. In contrast, the two-resistor splitter is matched only at the input port but shows a reflection coefficient of 0.25 in the reverse direction at the output ports when terminated in matched loads. The only information commonly found in literature regarding this type of splitter is that it should be used in leveling loops and reference measurements. As a justification for this advice, the effective source match is put forward, which is supposed to be zero for the splitter but gives -0.5 for the divider. This behavior is explained in this article. This calculation is a good example of how to use a signal flow graph and apply Mason's Rule. Getting to the bottom of this puzzle leads to digging out some very old publications.