Ziel des Projekts ist es, ein High Speed Real Time Network zu entwickeln, das den Kontroll- und Datentransfer zwischen Meßeinheiten und einer MPU (Master Processing Unit) über Distanzen von 100m - 3000m innerhalb definierter Zeiten (response time 1ms) erlaubt. Eine Hub-basierte Topologie wird angestrebt. Im Vollausbau sollen bis zu 1000 Meßeinheiten
von einem PC Meßplatz, dem auch die Auswertung vorbehalten bleibt,angesteuert werden können.
Die durchzuführenden Arbeiten umfassen die Verifikation des Konzepts der Netzwerktopologie und des eingesetzten Protokolls, eine Abschätzung der Realisierbarkeit auf Zieltechnologie Xilinx FPGA (Spartan 2), die
Entwicklung der Verhaltensmodelle in VHDL zur Systemsimulation und Verifikation der Anforderungen, die VHDL-Modellierung aller Komponenten (Real Time Network PCI-Karte und Hubs), die Synthese, Place&Route und die abschließende Erprobung des Systems.
Sprache der Kurzfassung:
Deutsch
Englische Bezeichnung:
Real Time Network
Englische Kurzfassung:
A real time network connecting multiple measurement devices with a central master processing unit (MPU) over distances from 100m to 3000m is to be developed. The response time of 1ms is required. A hub based network topology, allowing to control up to 1000 measuring devices from one single PC measuring station, is projected. A concept verification of the utilized network topology and the used
protocolls and an estimation of the technical feasibility on Xilinx FPGA (Spartan 2) technology has to be done first. Subsequently the VHDL implementation of behavioral models, needed for system simulation and requirement verifikation, and synthesizable models, including real time network PCI card and hub devices, is proceeded. After placement & routing the proving is done.